Whole body vibration is one of the common problems in the practical application of the dryer production line. The main cause of the failure is usually the damage of the connection between the tug device and the base. In addition, if the roller ring side of the dryer production line causes severe wear during long-term use, it will also cause vibration problems for the whole machine.

In view of the vibration of the whole grain dryer production line, the main solution is to tighten and correct the connection between the tug device and the base to ensure that the connection position of the tug device and the base is correct. In view of the wear problem on the side of the rolling ring, different treatment methods should be adopted according to the actual situation. If the wear is serious, it needs to be replaced directly; if the wear is light, you need to rotate the rolling ring to restore normal function and eliminate the overall vibration of the dryer.

The production consumption of equipment is divided into production consumption, fixed depreciation and maintenance consumption. Wantai believes that customers can reduce equipment consumption by improving the operation level and sense of responsibility of the dryer production line operators. The main measures are as follows:

1. The operator of the dryer production line should undergo strict training before taking up the job. The training should be theoretic first, and the actual operation should be carried out after the assessment is passed to prevent the phenomenon of training a group of people and damaging a group of equipment.

2. Strictly supervise the normal operation and random inspection of the operators of the dryer production line to prevent people from being lazy and irregular in operation. Because there was no condition or malfunction in the dryer production line at that time, it does not mean that it was not damaged. After a long period of time, some undesirable effects will appear.

3. Strict assessment. For any good system, no assessment is equivalent to no system, and no assessment is equivalent to condoning the occurrence of bad situations.

Only through the combined application of the above methods can the production cost of the drying process be continuously reduced, the production efficiency of the dryer production line can be continuously improved, and the market competitiveness of the enterprise can be improved.

With the continuous improvement of the process, it is believed that the development of the dryer production line will be more mature and reduce environmental pollution. The development direction of dryer production should be high-quality, low-energy-consumption development.

In recent years, the market potential of dryer equipment has continued to expand. However, fierce competition in the industry, some companies focus on immediate benefits, lack of systematic development ideas, and slow overall quality improvement, which seriously hinders the normal development of the industry.

Under the pressure of the buyer's market, some companies are not looking for and opening up the market, but are catching up with the market, focusing on mature products that have a large demand in the market in the near future. Therefore, in the oven, vibrating fluidized bed, spray dryer production line and other products, manufacturers are more concentrated, and the competition is fierce.

Few companies in the industry are engaged in the development of dryer production lines. The improvement of new products and the introduction of new products mainly rely on mutual imitation. At present, more and more companies enter the domestic market, and many dryer manufacturers have set up branches in China to seize the Chinese market. Therefore, if domestic dryer manufacturers want to gain a firm foothold in the market, they must adopt advanced technology, improve product quality, and continue to work towards high quality and low energy consumption.